PRODUCT DESCRIPTION
PALM CEMENTITIOUS TILE ADHESIVE is a blend of portland cement, graded sand and specially
Organic polymers reacted. Use for adhesive such decorative materials as ceramic tiles, floor
tiles, marble and mosaic ECT. It is widely used in such places as interior and exterior
walls, fool ,bathroom, kitchen, swimming pool ECT.
PLAM are of high adhesive force, water proofing, cracking aging and it is easy for construction. So it
is an ideal bonding material.
SCOPE OF USE
surface of cement make products.
stone walls.
cement plaster and renders.
INSTRUCTION FOR USE
Mix the product with water in the proportion of 4:1,and leave the paste to stand
to about 5 minutes.
Apply the well mixed paste on the back of the tiles which are going to stick on the
wall, then press them firmly to ensure full adhesion on the entire surface. The construction
surface must be wet, clean(non greasy matters and dust), even. So as to avoid affecting the adhesive strength.
For ceramic tiles and floor tiles, it is recommended to leave a expand joint of 2-3mm between the
tiles.
USAGE
3-4kg/㎡ for 2-3mm.Thickness. It is about 6kg/㎡ for mosaic and marble. Depending on the substrate and the size of tile.
STORAGE
Keep in dry place and in original packaging.
Stored 6 months.
HEALTH AND SAFETY
PALM non contain any harmful substance .But it contain cement component Take care to
avoid with skin contact. If splashed onto the eyes, please washing with water immediately.
|
